Can I connect wireless devices to the GigaSpire router using the WPS?

• Related Articles

• What is the WPS button on my GigaSpire router for?

  WPS stands for WIFI Protected Set-up and is a security standard that makes it easier and faster to connect your GigaSpire to other wireless devices. Instructions below show you to use the WPS button for pairing.

• Can the GigaMesh mesh extender use both a wired and wireless connection to the GigaSpire router?

  The GigaMesh mesh extender can extend network WIFI coverage using either a wired or wireless connection back to the GigaSpire router, but not both at the same time. If you want to switch from wired to wireless or vice versa, you will need to reset ...

• Where is the best place to put my GigaSpire router?

  The best place to put your router is in a central location with good “line of sight” visibility to the main areas of your home. If you need to place your router in a non-central location and find it does not reach all the areas in your home where you ...

• What wireless standards are available on the GigaSpire router?

  The GigaSpire supports the following 802.11 standards on its wireless radios: 5 GHz: 802.11ax (WIFI 6), 802.11ac, and 802.11n 2.4 GHz: 802.11ax (WIFI 6), 802.11n, 802.11g

• Why am I unable to log into the GigaSpire router web interface using the credentials shown on the bottom of the system?

  Advanced users may need to access the Embedded Web Interface (EWI) to configure features such as port forwarding or LAN IP addressing. To access the EWI, you can use the default admin account using the credentials printed on the label on the bottom ...