Can I replace the battery in my UPS myself?

Can I replace the battery in my UPS myself?

Yes! Additional or replacement batteries can be purchased from Norvado or a battery outlet (i.e. Batteries Plus) and replaced by you if so desired. To do so, you will need to determine the battery type and size by locating the UPS, usually where the fiber line enters the premise and near a power breaker box, and noting the battery specifications that is currently in use. When you wish to begin using the new battery, simply remove the old battery, insert and connect the new one.

To test the battery in the UPS, unplug the UPS from the A/C outlet. The battery should begin supporting hardwired, non-cordless phones, and television and internet service(s), if applicable. The UPS may have visual and/or audible alarms to indicate the status and condition of the unit.

    • Related Articles

    • Can I test the battery in my UPS?

      You can. To test the battery in the UPS, unplug the UPS from the A/C power outlet. The battery should begin supporting hardwired, non-cordless phones, and television and internet service(s), if applicable, in a non-use mode for up to 8 hours. This ...
    • What is the warranty for my UPS/BBS systems?

      The Uninterruptible Power Supplies (UPS) and Battery Backup Systems (BBS) provided by Norvado do come with manufacturer warranties. The most common manufacturers of Norvado equipment are: Cyber Power Typically a 3 year warranty Support: 877-297-6937 ...
    • What is an Uninterruptible Power Supply (UPS)?

      A UPS is an electrical device that provides emergency power to the Optical Network Terminal (ONT) when the main A/C power source fails. It differs from an auxiliary power supply or standby generator as it will provide near-instantaneous protection ...
    • What is an Uninterruptible Power Supply (UPS)?

      A UPS is an electrical device that provides emergency power to the Optical Network Terminal (ONT) when the main A/C power source fails. It differs from an auxiliary power supply or standby generator as it will provide near-instantaneous protection ...
    • Where are the UPS and ONT typically located?

      Typically the Uninterruptible Power Supply (UPS) and Optical Network Terminal (ONT) are located within close proximity to each other being the UPS is required to be wired to the ONT to provide power. The UPS requires a connection to an A/C power ...