How do I install my router?

Connect your router to a power outlet.
Connect one end of the supplied ethernet cable to one of the LAN ports found on the back of the internet access device (e.g. modem or ONT) and the other end of the cable to the WAN port on the back of the router.
The solid blue light indicates success. You are connected to your Norvado internet.

Click here for a detailed guide on installing your Apex router from Norvado.

Questions? Please contact our 24/7 support team at 800-250-8927.

Related Articles
What wireless standards are available on the Apex router?
The Apex router supports the following 802.11 standards on its wireless radios: 5 GHz: 802.11ax (WIFI 6), 802.11ac, and 802.11n 2.4 GHz: 802.11ax (WIFI 6), 802.11n, 802.11g
Where is the best place to put my Apex router?
The best place to put your router is in a central location with good “line of sight” visibility to the main areas of your home. If you need to place your router in a non-central location and find it does not reach all the areas in your home where you ...
What is the WPS button on my Apex router for?
WPS stands for WIFI Protected Set-up and is a security standard that makes it easier and faster to connect your Apex router to other wireless devices. Instructions below show you to use the WPS button for pairing.
How do I reboot the Apex router and keep my settings?
Use one of the following methods to reboot your router: 1) Remove power from the Apex router for 10 second, then reapply power. 2) Press the RESET button on the Apex router for less than 3 seconds.
How do I install and mount my Arlo Video Doorbell (2nd Gen) without hardwiring it?
To install your Arlo Video Doorbell (2nd Generation), you must have the following items: The items listed in the Quick Start Guide that were included in the original product box The Arlo Secure App A mobile device (Bluetooth capable) A screwdriver A ...

Related Articles