The Apex mesh extender can extend network WIFI coverage using either a wired or wireless connection back to the Apex router, but not both at the same time. If you want to switch from wired to wireless or vice versa, you will need to reset the Apex ...
You can press the RESET button on the back of the router for at least 10 seconds for a factory reset, but only take this step if your service provider requests that you do this. You will lose internet service.
The Apex router supports the following 802.11 standards on its wireless radios: 5 GHz: 802.11ax (WIFI 6), 802.11ac, and 802.11n 2.4 GHz: 802.11ax (WIFI 6), 802.11n, 802.11g
WPS stands for WIFI Protected Set-up and is a security standard that makes it easier and faster to connect your Apex router to other wireless devices. Instructions below show you to use the WPS button for pairing.
The best place to put your router is in a central location with good “line of sight” visibility to the main areas of your home. If you need to place your router in a non-central location and find it does not reach all the areas in your home where you ...