Better placement. Better protection. Greater peace of mind.
Getting the most out of your Norvado IQ cameras starts with choosing the right location with your technicians help. A properly positioned camera helps capture important activity, improve motion detection, and reduce unnecessary notifications.
For outdoor security cameras, a mounting height of approximately 8–10 feet is a useful starting point.
Position cameras high enough to discourage tampering.
Angle cameras slightly downward toward the area you want to monitor.
Avoid mounting them so high that people appear too small in the video.
For video doorbells, aim for approximately 4 feet above the ground.
Norvado Tip: The goal is to capture useful details, not just a wide view of your property.
Position cameras where activity is most likely to occur.
Recommended locations include:
Front doors and main entrances
Driveways and garage doors
Back doors and patios
Walkways and side entrances
Detached garages, sheds, and outbuildings
Norvado Tip: Position cameras so people and vehicles move across the camera's view, when possible, rather than directly toward it. This can improve motion detection.
Bright sunlight can make it difficult to see details clearly.
Avoid pointing cameras directly toward the rising or setting sun.
Be mindful of reflections from windows, vehicles, and water.
Whenever possible, position cameras under eaves or other protected locations.
Check the camera's view at different times of day.
Norvado Tip: Test your camera in both morning and afternoon lighting before finalizing its placement.
Camera placement is just as important after dark.
Avoid pointing cameras toward bright outdoor lights.
Keep reflective surfaces away from the lens.
Avoid placing the lens too close to walls, soffits, or other nearby objects.
Make sure landscaping doesn't block the camera's nighttime view.
Test night vision before completing installation.
Norvado Tip: Objects too close to a camera can reflect infrared light back into the lens, creating a washed-out or blurry nighttime image.
Your camera needs a reliable Wi-Fi connection to work properly.
Test Wi-Fi strength at the intended installation location.
Avoid placing cameras behind large metal objects.
Remember that brick, concrete, metal siding, and thick exterior walls can weaken Wi-Fi signals.
Consider improving Wi-Fi coverage if the connection is unreliable.
Norvado Tip: Check the live video feed at the mounting location before drilling holes or permanently securing the camera.
Smart placement helps your camera focus on what matters.
Avoid pointing cameras at busy roads when possible.
Keep moving tree branches and bushes outside important detection areas.
Avoid aiming cameras toward constantly moving objects.
Set up Video Analytics detection zones for entrances, driveways, and other important areas.
Adjust motion sensitivity after installation.
Norvado Tip: Use Ground Zones to monitor specific areas and Tripwires to detect activity crossing an entry point, when supported by your camera.
Living in the Northwoods means planning for changing conditions throughout the year.
Mount cameras where snow and ice are less likely to accumulate.
Avoid locations directly beneath roof edges where icicles may form.
Consider how snowbanks could block the camera's view.
Keep cameras accessible for occasional cleaning and maintenance.
Protect exposed wiring and power connections according to installation instructions.
Norvado Tip: Battery-powered cameras may require more frequent charging during cold weather. Choose a location that's easy to access for maintenance.
Position your cameras to monitor your own property while respecting the privacy of others.
Avoid pointing cameras directly into neighboring windows.
Keep recording areas focused on your property.
Use available privacy settings when appropriate.
Be mindful of local laws regarding audio and video recording.
Before permanently installing your camera:
Connect the camera to your Wi-Fi network.
Temporarily position it in the desired location.
Open the Alarm.com app and check the live video.
Verify that the important areas are visible.
Test motion detection by walking through the area.
Check nighttime video quality.
Adjust the angle or location as needed.
Secure the camera using the manufacturer's installation instructions.
Remember: A few minutes of testing can help prevent missed activity and unnecessary notifications later.
Whether you're installing your first camera or improving an existing setup, Norvado is here to help you make the most of your connected home.